.idrange 1000 1360
.version 2015262
1000	"SDL Validator UI"
1001	"SDL Simulator UI"
1002	"SDL Validator UI - "
1003	"SDL Simulator UI - "
1004	"SDL TargetSimulatorDebugger UI - "
1005	"ValUI Watch"
1006	"SimUI Watch"
1007	"ValUI Watch"
1008	"SimUI Watch"
1009	"ValUI Command"
1010	"SimUI Command"
1011	"ValUI Command"
1012	"SimUI Command"
1013	"Load Target Simulator"
1014	"ValUI Open Validator"
1015	"SimUI Open Simulator"
1016	"ValUI Exit Validator"
1017	"SimUI Exit Simulator"
1018	"No Tornado Simulator Connected"
1019	"No Simulator Connected"
1020	"No Validator Connected"
1021	"\n**** No Tornado Simulator selected ****\n"
1022	"\n**** No Validator selected ****\n"
1023	"\n**** No Simulator selected ****\n"
1024	"Invalid validator file name:\n"
1025	"Invalid simulator file name:\n"
1026	"Current validation will terminate"
1027	"Current simulation will terminate"
1028	"\nPlease use Open command to start an executable Tornado Simulator Host Kernel.\n"
1029	"\nPlease use Open command to start an executable Validator.\n"
1030	"\nPlease use Open command to start an executable Simulator.\n"
1031	"No active Validator"
1032	"No active Simulator"
1033	"No Validator license available"
1034	"No Simulator license available"
1035	"No Tornado Debugger license available"
1036	"No license available\n"
1037	"******************************\n**** NO LICENSE AVALIABLE ****\n******************************\n"
1038	"Could not initialize license handling:\n%1"
1039	"Licensing"
1040	"Exit"
1041	"Prompt"
1042	"Select"
1043	"Undo"
1044	"Command"
1045	"Add Command"
1046	"Edit Command"
1047	"Load Commands"
1048	"Append Commands"
1049	"Save Commands"
1050	"Start Complete Log"
1051	"Add Watch"
1052	"Edit Watch"
1053	"Delete Watches"
1054	"Load Watches"
1055	"Append Watches"
1056	"Save Watches"
1057	"Add Group"
1058	"Rename Group"
1059	"Delete Group"
1060	"Edit Button"
1061	"Add Button"
1062	"Delete Buttons"
1063	"Load Buttons"
1064	"Append Button"
1065	"Save Buttons"
1066	"Confirm"
1067	"Save Confirm"
1068	"Select synonym file to use"
1069	"Select Input Script to Execute"
1070	"Select Command Script to Execute"
1071	"Save Input Script"
1072	"Save Command Script"
1073	"Group name must not be empty"
1074	"Button label must not be empty"
1075	"Exactly one watch must be selected"
1076	"Watch must not be empty"
1077	"Command must not be empty"
1078	"Name of new group:"
1079	"Group Name:"
1080	"Label:"
1081	"Definition:"
1082	"Select a button to edit:"
1083	"Select button(s) to delete:"
1084	"Watch:"
1085	"Select a watch to edit:"
1086	"Select watch(es) to delete:"
1087	"Command:"
1088	"Command window set size"
1089	"Set size to:"
1090	"Command :"
1091	"Save changes to button set?"
1092	"Save changes to command set?"
1093	"Save changes to watch set?"
1094	"Select command(s) to redo:"
1095	"Select a command to execute:"
1096	"file is not executable"
1097	"Select a parameter to edit:"
1098	"Define Signal - "
1099	"Send Signal - "
1100	"Edit parameter "
1101	"OK"
1102	"Cancel"
1103	"Help"
1104	"Save"
1105	"Discard"
1106	"Sort"
1107	"Exit"
1108	"Continue"
1109	"Create"
1110	"Append"
1111	"Show"
1112	"Break after"
1113	"Apply"
1114	"Edit"
1115	"Delete"
1116	"Set"
1117	"Default value"
1118	"Cancel all"
1119	"Command Log File"
1120	"Complete Log File"
1121	"Button File"
1122	"Watch File"
1123	"Command File"
1124	"SDL Validator Executable"
1125	"SDL Simulator Executable"
1126	"SDL RealTimeSimulation Executable"
1127	"SDL ApplicationDebug Executable"
1128	"&File"
1129	"&Open...\tCtrl+O"
1130	"&Load...\tCtrl+L"
1131	"&Restart\tCtrl+R"
1132	"E&xit\tCtrl+Q"
1133	"&View"
1134	"&Watch Window"
1135	"&Command Window"
1136	"&Open All"
1137	"C&lose All"
1138	"Clear &Text Area"
1139	"&Buttons"
1140	"&Load..."
1141	"A&ppend..."
1142	"&Save"
1143	"Save &As..."
1144	"&Expand Groups"
1145	"&Collapse Groups"
1146	"Add &Group..."
1147	"&Log"
1148	"Com&plete Log"
1149	"Clear &Command History"
1150	"Save C&ommand History..."
1151	"Clear &Input History"
1152	"Save I&nput History..."
1153	"&Log Status..."
1154	"On &SDL Suite"
1155	"&On UI\tCtrl+H"
1156	"On &Validator"
1157	"On S&imulator"
1158	"On Validator &Commands"
1159	"On Simulator &Commands"
1160	"S&earch..."
1161	"&About UI..."
1162	"Group"
1163	"&Add..."
1164	"&Edit..."
1165	"&Delete..."
1166	"Re&name Group..."
1167	"De&lete Group..."
1168	"&Load..."
1169	"A&ppend..."
1170	"&Save"
1171	"Save &As..."
1172	"&Close"
1173	"&Watch"
1174	"&Update All"
1175	"Delete A&ll"
1176	"&Command"
1177	"&Add Command..."
1178	"Command"
1179	"&Delete"
1180	"&Size"
1181	"Stop Com&plete Log"
1182	"Start Com&plete Log..."
1183	"&Undo"
1184	"Open validator"
1185	"Open simulator"
1186	"Restart simulator"
1187	"Rerun script"
1188	"Undo command(s)"
1189	"Show Organizer"
1190	"Show Help"
1191	"Redo one command"
1192	"Save all commands on a file"
1193	"Undo one or more commands"
1194	"Load a new TargetSimulator"
1195	"&Reset"
1196	"S&ize"
1197	"S&ave"
1198	"S&earch"
1199	"&Version"
1200	"&Go to Source"
1201	"Show the Organizer main window"
1202	"Open an existing validator executable file"
1203	"Open an existing simulator executable file"
1204	"Restart the same validator"
1205	"Restart the current simulator from the initial system state"
1206	"Rerun last executed script"
1207	"Exit Validator"
1208	"Exit Simulator"
1209	"Show watch window"
1210	"Show command window"
1211	"Show command and watch windows"
1212	"Close command and watch windows"
1213	"Clear the text in the output area"
1214	"Clear the current button definitions and load new definitions from a file"
1215	"Append button definition from a file to current definitions"
1216	"Save current button definitions"
1217	"Save current button definitions to a file"
1218	"Expand all collapsed button groups"
1219	"Collapse all button groups"
1220	"Add a new button group"
1221	"Stop complete log"
1222	"Log everything printed in the output area on a file"
1223	"Save commands in the input history as a cui script"
1224	"Remove commands from the input history"
1225	"Save commands in the command history as a com script"
1226	"Remove all commands from the command history"
1227	"Show status of complete log"
1228	"Show help on SDL Suite"
1229	"Show help on Validator user interface"
1230	"Show help on Simulator user interface"
1231	"Show help on SDL Validator"
1232	"Show help on SDL Simulator"
1233	"Show help on SDL Validator commands"
1234	"Show help on SDL Simulator commands"
1235	"Search for help on keyword"
1236	"Show info"
1237	"Add a new button to the current button group"
1238	"Edit a button in the current button group"
1239	"Delete one or more buttons from the current button group"
1240	"Rename the current button group"
1241	"Delete the current button group"
1242	"Clear the current variable definitions and load new definitions from a file"
1243	"Append variable definitions from a file to current definitions"
1244	"Save current variable definitions"
1245	"Save current variable definitions to a file"
1246	"Close the watch window"
1247	"Update the watch window by showing the current value of all displayed variables"
1248	"Add one or more variables to the watch window"
1249	"Edit a variable specification in watch window"
1250	"Delete one or more variables from the watch window"
1251	"Delete all variables from the watch window"
1252	"Clear the current command definitions and load new definitions from a file"
1253	"Append command definitions from a file to current definitions"
1254	"Save current command definitions"
1255	"Save current command definitions to a file"
1256	"Close the command window"
1257	"Add one or more commands to the command window"
1258	"Update the command window by executing the defined commands"
1259	"Edit the command specification in the current command module"
1260	"Delete the current command module from the command window"
1261	"Set the size of the text area of the current command module"
1262	"Execute command: %1"
1263	"Values for external synonyms are taken from"
1264	"The following external synonyms were not found in synonym file\n%1:"
1265	"Reset external synonym filename (current value %1)"
1266	"The specified synonym file will be used the next time\nthe simulator is restarted from the simulator UI."
1267	"Change size of textbuffer to the value given in the command field (current value %1)"
1268	"Save text area on file with the filename given in the command field"
1269	"Search in the text area for text given in the command field"
1270	"Search for:"
1271	"Show build date (%1)"
1272	"Go to a SDT reference given by the selection in the text area"
1273	"Add watchvariable given by the selection in the text area"
1274	"Add to &Watchwindow"
1275	"Error"
1276	"RPC Error"
1277	"Help Error"
1278	"Missing help hyper-link"
1279	"Add Command Error"
1280	"Edit Command Error"
1281	"Save Error"
1282	"FATAL ERROR: The UI lost contact with graphics services\n"
1283	"Wrong number of parameters"
1284	"Invalid parameter"
1285	"Error: "
1286	"Warning: "
1287	"Synopsis: "
1288	"<filename>"
1289	"Could not read file: %1"
1290	"Could not open file: %1"
1291	"Syntax error in %1"
1292	"Internal error"
1293	"OUTPUT INTERRUPTED\n"
1294	"Auto restart is now on"
1295	"Auto restart is now off"
1296	"Stop at failure is now on"
1297	"Stop at failure is now off"
1298	"Expected output will now be updated"
1299	"Update expected output is now off"
1300	"AVAILABLE COMMANDS IN SIMULATOR UI"
1301	"MACRO COMMANDS"
1302	"SIMULATOR TEST COMMANDS"
1303	"INPUT AND COMMAND HISTORY COMMANDS"
1304	"Input history cleared."
1305	"Command history cleared."
1306	"Checking next command."
1307	"Save commands: "
1308	"Command not yet executed"
1309	"Command canceled"
1310	"Command execution failed"
1311	"Command successfully executed"
1312	"Content of expected-output updated"
1313	"Check successful."
1314	"Auto restart: "
1315	"Stop at failure: "
1316	"Update expected output: "
1317	"Command could not be checked. Missing expected output."
1318	"Still testing %1"
1319	"Executing %1: "
1320	"Check failed! Expected output:\n%1\n%3\n%2\n"
1321	"Command statistics:\n\tchecked: %1\n\tfailed: %2\n\tupdated: %3\n"
1322	"Number of macros defined: %1"
1323	"Macro name:  %1"
1324	"Macro value: %1"
1325	"Input history written to file %1"
1326	"Command history written to file %1"
1327	"textBufferLimit set to %1"
1328	"The command is used to define macros. A macro can be a complete command or\na part of a command. To use a macro, type '$' immediately followed by the\n<Macro name>."
1329	"The command gives a list of all macros defined with add-macro."
1330	"The command removes the macro with the given name."
1331	"The command decides if the execute-input-script command should\nrestart the simulator before executing the input script. As\ndefault, auto-restart is on and the simulator is restarted."
1332	"The command decides if the execution of an input script, started\nwith the execute-input-script command, should be terminated if\na check fails. As default, stop-at-failure is on and\nexecution is terminated."
1333	"The command decides if information about expected output should\nbe updated when an input script is executed or not. If it is\nupdated, save-input-history will include information from the\nexecution in expected output sections. If not, save-input-history\nwill include information from the executed input script in expected\noutput sections."
1334	"The command instructs the simulator UI to check the next command.\nWhen commands are entered manually, the check command makes the\nsimulator UI to remember the textual output for the next command\nin the input history. When an input script is executed, the check\ncommand instructs the simulator UI to compare the simulator output\nwith the expected output from the input script and report any\ndifference."
1335	"The command specifies the synonym file to use the next time the simulator\nis restarted from the simulator UI. A synonym file contains\n<name> <value>-pairs for external synonyms in the SDL system."
1336	"The command executes the commands in the given input script file.\nInput scripts contain both simulator commands and simulator UI commands.\nInput scripts can be saved with the Save-Input-History command."
1337	"The command clears the simulator UI input history without\nrestarting the simulator."
1338	"The command saves the input history in an input script file."
1339	"The command executes the commands in the given command script file.\nCommand scripts contain simulator commands, but not simulator UI commands.\nCommand scripts can be saved with the Save-Command-History command."
1340	"The command clears the simulator command history without\nrestarting the simulator."
1341	"The command saves the command history in a command script file."
1342	"%1 already exists! Append?"
1343	"File is not executable:\n%1\n%2"
1344	"Overwrite existing file %1?"
1345	"Delete group \"%1\"?"
1346	"\n**** Error during initialization of buttons ****\nCould not find file: %1\n%2\nPlease check installation or your preferences\n"
1347	"**** Error during open ****\nTried to start file name : %1\n%2\n"
1348	"**** Error during open ****\n%1%2\n%3\n"
1349	"Incorrect suffix of validator file name:\n%1\n"
1350	"Incorrect suffix of simulator file name:\n%1\n"
1351	"Incorrect suffix of validator file.\nOpen anyway?"
1352	"Incorrect suffix of simulator file.\nOpen anyway?"
1353	"Log Status"
1354	"inactive"
1355	"Complete log : %1"
1356	"Directory name : "
1357	"File name : "
1358	"Could not send signal, instance does not exist.\n"
1359	"Variable Names :"
1360	"Failing at character position %1:\n%2\n"