.idrange 3000 4279
.version 8399579
3000	"Add"
3001	"Add list"
3002	"Add text"
3003	"All files"
3004	"Analyze/generate code"
3005	"Analyzer options"
3006	"Break"
3007	"Cancel"
3008	"Capitalization lower case"
3009	"Clear"
3010	"Close"
3011	"Commands"
3012	"Compile as debug"
3013	"Current"
3014	"Default"
3015	"Environment functions"
3016	"Environment header file (configuration on other tab)"
3017	"Full Make"
3018	"Full variable prefix"
3019	"Generate section %1"
3020	"Help"
3021	"Include routing header file"
3022	"Instance information file"
3023	"Make"
3024	"Modify"
3025	"None"
3026	"OK"
3027	"Other"
3028	"Pre-processor"
3029	"Remove"
3030	"SDL Simulator"
3031	"SDL Target Tester"
3032	"SDL Validator"
3033	"Save commands"
3034	"Save"
3035	"Settings from component, node or application"
3036	"Show error info on stdout"
3037	"Signal number file"
3038	"TCP/IP"
3039	"Undo"
3040	"&Add"
3041	"&Cancel"
3042	"&Close"
3043	"&Execute"
3044	"&Help"
3045	"&No"
3046	"&OK"
3047	"&Remove"
3048	"&Yes"
3049	"generate ASN.1 coder functions"
3050	"generate SDL coder functions"
3051	"About SDL Targeting Expert"
3052	"Add Communications Link"
3053	"Add User defined C-Compiler"
3054	"Add a Flag Taking Text"
3055	"Add a Flag Taking a List of Values"
3056	"Add a file to be linked"
3057	"Add a kernel source file to compile"
3058	"Add a library to be linked"
3059	"Add a source file to compile"
3060	"Add a source file to convert"
3061	"Sorry, no help available"
3062	"Automatic configuration needed"
3063	"Component Info"
3064	"Customize"
3065	"Delete integration?"
3066	"Edit Compiler Section"
3067	"Export a settings file"
3068	"Flag Dependencies"
3069	"Flatten Directory Structure?"
3070	"Modify object file path"
3071	"Modify source path"
3072	"Problem"
3073	"Process Type IDs (Cmicro)"
3074	"Remove a communications link"
3075	"Remove a C-Compiler"
3076	"SDL Targeting Expert"
3077	"SDL Targeting Expert Editor: %1"
3078	"SDL Targeting Expert Editor - %1"
3079	"SDL Targeting Expert Editor - %1 R"
3080	"SDL Targeting Expert: %1"
3081	"SDL Targeting Expert: Question"
3082	"SDL Targeting Expert - %1"
3083	"Save?"
3084	"Save Analyzer command file"
3085	"Save As"
3086	"Save File"
3087	"Select Download Tool"
3088	"Select Library Directory"
3089	"Select Object Directory"
3090	"Select Post-Treatment application"
3091	"Select Pre-Treatment application"
3092	"Select a Partitioning Diagram"
3093	"Select a file"
3094	"Select a makefile generator"
3095	"Select a pre-make tool"
3096	"Select a user settings file"
3097	"Select makefile"
3098	"Select routing file"
3099	"Select the Assembler"
3100	"Select the Compiler"
3101	"Select the C parser"
3102	"Select the Library Manager"
3103	"Select the file(s) to convert"
3104	"Select the file(s) to indent"
3105	"Select the generated C files to preprocess with the default compiler"
3106	"Select Test Tool"
3107	"Specify a new symbolic compiler name"
3108	"Specify command"
3109	"Switch on?"
3110	"TCP/IP Communication Wizard"
3111	"Targeting Expert: %1"
3112	"Template files to copy"
3113	"Welcome to Targeting Expert"
3114	"Cannot open file <%1>.\n"
3115	"Command: %1\n"
3116	"Commandline: %1\n"
3117	"First time entering %1\n"
3118	"Reading file <%1>.\n"
3119	"Reading <%1> OK\n"
3120	"%1 - do not generate"
3121	"%1 - generate all process instance sets into one OS task"
3122	"%1 - generate one OS task per process instance set"
3123	"%1 - generate one OS task per thread specified in deployment"
3124	"Additional includes:"
3125	"Additional files to compile:"
3126	"Additional libraries:"
3127	"Additional object files:"
3128	"Advanced Mode"
3129	"A new set of compiler settings will be created"
3130	"Assembler:"
3131	"Automatically save if settings are modified"
3132	"Begin:"
3133	"Click on the left most combo box and select a pre-defined integration"
3134	"Code generation options"
3135	"Coders"
3136	"Comm. Include:"
3137	"CommLink group:"
3138	"CommLink macro:"
3139	"CommLink name:"
3140	"Communication"
3141	"Compile as C++"
3142	"Compiler Description"
3143	"Compiler/Linker/Make"
3144	"Compiler macro:"
3145	"Compiler name:"
3146	"Configure the selected integration"
3147	"C parser and assembler description"
3148	"C parser name:"
3149	"Critical path"
3150	"Current"
3151	"DOS to UNIX conversion"
3152	"Default value:"
3153	"Dependancies:"
3154	"Dependent flags"
3155	"Directories"
3156	"Do not show again at startup"
3157	"Download application"
3158	"Do you want all the flags to be set up as needed?"
3159	"End:"
3160	"Environment"
3161	"Environment header file generation options"
3162	"Exe. extension:"
3163	"Exported pre-defined integration as project settings"
3164	"Exported pre-defined integration as user settings"
3165	"File"
3166	"File name:"
3167	"File name prefix:"
3168	"Files"
3169	"Filter"
3170	"Filter Analyzer output"
3171	"Generate C code and make the target executable"
3172	"Generate makefile"
3173	"Generation style:"
3174	"Generator:"
3175	"Host connection"
3176	"Include:"
3177	"Include paths"
3178	"Indent"
3179	"Input ext.:"
3180	"Input ext.:"
3181	"Integration Model: "
3182	"Kernel exit:"
3183	"Lib. manager:"
3184	"Library Flag:"
3185	"Library Manager Description"
3186	"Library directory:"
3187	"Library extension:"
3188	"Linker Description"
3189	"Linker name:"
3190	"List of files:"
3191	"List of libraries:"
3192	"List of objects:"
3193	"List of possible values\n(separated by <return>):"
3194	"Lower limit (int):"
3195	"Macro:"
3196	"Makefile:"
3197	"Makefile generation parameters"
3198	"Make tool"
3199	"Make tool:"
3200	"Executing command <%1>.\n"
3201	"\nCommand: "
3202	"Modify library path"
3203	"Name:"
3204	"Never ask for flattening again"
3205	"No info available!"
3206	"Note: The environment header file generation cannot be switched off\n if coder or environment functions are selected."
3207	"Note: if modifying this rule, an existing env.c file will be destroyed!"
3208	"Object directory:"
3209	"Obj. extension:"
3210	"Options:"
3211	"Partitioning Diagram Model"
3212	"Path"
3213	"Please follow the red bordered squares on the Targeting Expert's main window!\nThey will show the order of targeting steps and open the help viewer if clicking on them."
3214	"Please modify the library path to your needs"
3215	"Please modify the object file path to your needs"
3216	"Please modify the source file path to your needs"
3217	"Post-link:"
3218	"Pre-compile:"
3219	"Pre-make:"
3220	"Preprocessing"
3221	"Reset \"automatic save\" for modified dialogs"
3222	"Routing"
3223	"Routing header file:"
3224	"Routing source file:"
3225	"SDL to C compiler"
3226	"SELECT INTEGRATION"
3227	"Save modifications in current dialog?"
3228	"Select a filename to export settings"
3229	"Select a file to get the settings from"
3230	"Select a process type id to copy it into clipboard!"
3231	"Select one of the SDL Suite applications or specify the command line of\nanother test application.\nThe test application will automatically be started after\nthe download has been done successfully."
3232	"Select the desired component in the Partitioning Diagram Model (PDM)"
3233	"Select the editor (i.e. the editor command) to use\n%f - filename and %l - line"
3234	"Select the file(s) to copy into the target directory"
3235	"Separation:"
3236	"Server configuration"
3237	"Server port number:"
3238	"Signal sending"
3239	"Specify a command line for the download application to use.\nThis download application will automatically be started after\nthe make process is successfully completed."
3240	"Supported SDL to C compilers are:"
3241	"Target executable:"
3242	"Target Tester"
3243	"Targeting Expert's editor"
3244	"Tau Text Editor"
3245	"Test application"
3246	"Text Editor"
3247	"The basic options how to generate code have to be set here."
3248	"The compiler is able to handle function prototypes as defined in ANSI-C"
3249	"The compiler is able to handle the C keyword <const> in the correct way"
3250	"The compiler supports variables stored in registers"
3251	"The compiler supports <stdio.h>"
3252	"Input here goes to the \"Communication\" tab of the main section,\nthe  \"Source Files\" tab of the Compiler section and\nthe \"Environment\" tab of the \"Target Library\" section.\nPlease modify these sections if needed!"
3253	"The library mamager is used only if coder function are to be included."
3254	"The micro controller/processor is faster in accessing characters than integer values"
3255	"The placeholders %s (source file), %o (object file) and %I (include path) must be used."
3256	"The placeholders %s (source file), %o (object file) must be used."
3257	"The placeholders %O (list of object files), %L (list of libraries) and %e (executable file) are allowed."
3258	"The placeholders %O (list of object files) and %l (library name) can be used"
3259	"The placeholders %s (source file), %o (object file) and %I (include path) must be used."
3260	"The placeholder %s will be replaced by the component's name,\n%c will be replaced by the converter tool file (including path)."
3261	"The placeholder %s will be replaced by the executable's name (including path)."
3262	"The placeholder %s will be replaced by the source file's name (including path)."
3263	"The placeholder %t will be replaced by the target executable's name (including path)."
3264	"The placeholder %t will be replaced by the target executable's name (including path)."
3265	"The rules to generate names in the environment header file can be specified here.\n\nThe placeholder %n represents the name of the item and cannot be removed.\n%s can optionally be added and represents the scope of the item."
3266	"The selected component consist of ..."
3267	"These settings are to be used for additional files which should not be compiled with the standard compiler.\n(Maybe only the compiler options may differ.)"
3268	"The warning or error message given here will be filtered from\nthe Analyzer output (Example: WARNING 5, ERROR 300)"
3269	"This flag, \"%1\" (%2), has dependencies!"
3270	"Tight integration converter tool"
3271	"Tip: Several actions can be accessed by pressing the right mouse button on the items in the Partitioning Diagram Model."
3272	"To use the pre-processor command as pre-compile step press button:"
3273	"UNIX to DOS conversion"
3274	"Upper limit (int):"
3275	"Used SDL Target Tester files:"
3276	"Used kernel and library files:"
3277	"Use download application"
3278	"User definitions"
3279	"Work in advanced mode"
3280	"You are entering the Targeting Expert the very first time, therefore the Assistant has been switched on.\nIt can be switched off by pressing the Assistant button in the quick button bar."
3281	"and the ones below must be set:"
3282	"%1 as:"
3283	"depends on the following flags set:"
3284	"%1 - do not separate"
3285	"Makefile generation"
3286	"\"no more memory\" action:"
3287	"not specified"
3288	"%1 - separate each SDL Organizer entity into one C file"
3289	"Target Library"
3290	"Target platform offers OS functions"
3291	"the flags below must be reset:"
3292	"these flags will automatically be set:"
3293	"%1 - use the user defined separation done in Organizer"
3294	"Error"
3295	"'ActionInterpretation' PM_MESSAGE not supported in configurable menus"
3296	"Another SDL Targeting Expert is already connected\nto the Telelogic Tau Postmaster.\nCannot proceed -> exiting."
3297	"Association '%1' found in line %2\nof <%3>\nnot yet supported"
3298	"Attempt to send to erroneous pid"
3299	"Attempt to send to unknown tool"
3300	"Blanks inside the macro are not allowed!\n"
3301	"Cannot read settings file <%1>"
3302	"Cannot compare <%1> with <%2>"
3303	"Cannot copy <%1> into <%2>"
3304	"Cannot create sub-directory\n<%1>."
3305	"Cannot delete user settings file\n%1"
3306	"Cannot evaluate line %1 of file <%2>"
3307	"Cannot evaluate make command for <%1>"
3308	"Cannot evaluate path to <%1>"
3309	"Cannot execute <%1>."
3310	"Cannot fork an sh!"
3311	"Cannot generate default <%1>."
3312	"Cannot handle type %1."
3313	"Cannot open file <%1>"
3314	"Cannot open file <%1>\nbecause environment variable '%2'\nis unknown!"
3315	"Cannot open file <%1>\nbecause environment variable '%2'\nis unknown!"
3316	"Cannot open file.\n<%1>\nFile does not exist"
3317	"Cannot open file <%1> in <%2> for reading."
3318	"Cannot open file <%1> for reading."
3319	"Cannot open file <%1> for writing."
3320	"Cannot open file <%1>\nor file is not a PDM file"
3321	"Cannot open parameter file <%1>."
3322	"Cannot open system in <%1>"
3323	"Cannot read <%1>\nin <%2>"
3324	"Cannot read settings file <%1>"
3325	"Cannot save compiler, linker and make configurations."
3326	"Cannot save file\n<%1>"
3327	"Cannot save file!\nWrite protection\nLeave anyway?"
3328	"Cannot save file\nbecause of write protection"
3329	"Cannot save settings to <%1>"
3330	"Cannot save the file <%1>"
3331	"Cannot select \"%1\"."
3332	"Cannot select application \"%1\"."
3333	"Cannot select component \"%1\"."
3334	"Cannot select node \"%1\"."
3335	"Cannot set default compiler '%1'!"
3336	"Cannot start SDL Target Tester because there is already one instance running."
3337	"Cannot write parameter file for external makefile generator."
3338	"Class <%1> not allowed in this context."
3339	"Analyze/Code generation failed."
3340	"Command <%1> failed."
3341	"Command <%1> failed."
3342	"Command \"%1\" is ambiguous."
3343	"Command \"%1\" is unknown."
3344	"Compile and link failed."
3345	"Compiler \"%1\" can only be defined once in <%2>."
3346	"Content '%1' not found in <%2> <%3>."
3347	"Definition marker expected in line %1\nof file <%2>"
3348	"Definition sub-group expected in line %1\nof file <%2>"
3349	"No De-initialization found in function %1 (see env.c)"
3350	"Dependancy <%1> not found!"
3351	"Entry <%1> not allowed in this context."
3352	"Entry <%1> not known."
3353	"Entry not allowed in this context."
3354	"Error in line %1 of file <%2>."
3355	"File <%1> cannot be written."
3356	"File\n<%1>\nnot found."
3357	"Flag <%1> does not exist."
3358	"Generating %1 ... ERROR"
3359	"Generating <%1> OK."
3360	"Generating <%1> failed."
3361	"In compiler section:\nThere is no C-compiler selected\n(file <%1>).\n"
3362	"Initialization of\n <sdttaex %1>\nfailed!"
3363	"%I not found in compiler or additional compiler options."
3364	"Integrations not of the same type\n'%1' and '%2'"
3365	"Invalid message sent (%1)"
3366	"Invalid system file <%1> given"
3367	"It is not allowed to define a macro consisting of underscores only!"
3368	"It is not allowed to have characters like %1 or : in \"%2\"\n(line %3 of file <%4>)"
3369	"It is not possible to continue without having\na symbolic compiler name defined"
3370	"It is not possible to write a backup of the old\n<%1>.\nWrite new <%2>?"
3371	"It is not possible to write\na backup of the old %1."
3372	"It is not possible to write the file\n<%1>.\nWrite new <%2>"
3373	"It is not possible to write the file <%1>."
3374	"It is not possible to write the file\n<%1>\nbecause of write protection."
3375	"Keyword \"%1\" not allowed in line %2 of <%3>."
3376	"Makefile generation switched off."
3377	"Missing %1 in function '%2' (see env.c)"
3378	"Missing %1 in function '%2' (line %3 of env.c)"
3379	"Missing \"END\" in line %1\nof file <%2>."
3380	"More than one system can not be handled yet.\n(See <%1>)"
3381	"No %1 in env.c"
3382	"No initialization found in function %1 (see env.c)"
3383	"No TIMESTAMP found in file <%1>"
3384	"No compiler selected."
3385	"No connection to Tau possible.\nPlease start the Telelogic Organizer!"
3386	"No function '%1' found in env.c"
3387	"No global section found in env.c"
3388	"No input file specified!\nPlease type <sdttaex -h> for help."
3389	"No integration is selected.\n"
3390	"No integration selected!"
3391	"No memory left to send message (%1)"
3392	"No pre-defined integrations found at all"
3393	"No timestamp (XMK_ENV_TIME) found in env.c"
3394	"No variable section found in env.c"
3395	"No variable section found in function %1 (see env.c)"
3396	"Only 2 SDL to C compilers are allowed per integration. (See line %2 of <%3>)"
3397	"Only the SDL to C compilers 'Cadvanced' and 'Cmicro' are supported"
3398	"Only the following values are allowed: %1 or %2"
3399	"%O not found in linker options."
3400	"Please select an SDL to C compiler first"
3401	"Qualifier <%1> not found."
3402	"Reading env.c ... Errors detected"
3403	"Reading <%1> failed."
3404	"Saving the SDL system files failed."
3405	"Saving the file failed"
3406	"Section [?] missing in file <%1> DISCARDED"
3407	"Selected Tool (%1) not available"
3408	"Selected make tool is not known."
3409	"Settings for '%1' are not found in '%2'"
3410	"Something went wrong in line %1 of <%2>."
3411	"Some values are missing"
3412	"State error when reading <%1> (line %2)"
3413	"Tau Postmaster is already connected"
3414	"Tau Postmaster not yet connected"
3415	"The CommLink group is already defined.\nPlease choose another one!"
3416	"The SDL to C compiler's makefile >%1_gen.m< was not found."
3417	"The TCP/IP communication is designed only for\nSDL to C compiler 'Cadvanced' in combination\nwith a threaded integration.\n\nIt cannot be used for '%1' and <%2>"
3418	"The class has to be either '%1', '%2', '%3'\n'%4', '%5' or '%6'."
3419	"The compiler section cannot be written into file\n<%1>"
3420	"The current working directory is write protected. Cannot save files."
3421	"The current working directory\n<%1>\nis write protected. Cannot save files."
3422	"The directory\n<%1>\ncould not be created."
3423	"The following problem(s) are detected:\n\n%1"
3424	"The found menu configuration file <taex-menus.ini> is not valid."
3425	"The macro contains not allowed characters!\nPlease use %1"
3426	"The macro has to begin with a non-numeric character!\nPlease use %1 as first character!"
3427	"The macro is already in use !\n\nPlease edit an other designation."
3428	"The name and the macro are already in use !\n\nPlease edit other designations."
3429	"The name is already in use !\n\nPlease edit an other designation."
3430	"The needed pre-defined integration settings\ncannot be found for '%1'"
3431	"There is an inconsistency in configuration defaults."
3432	"There is no automatic configuration file >sdl_cfg.h< found."
3433	"There is no compiler available in this integration.\nPlease try again in advanced mode!"
3434	"There is no item selected"
3435	"There is only one line allowed for the small helptext.\nSee line %1 of file <%2>"
3436	"The selected integration name is already in use.\nPlease select another one!"
3437	"The selected compiler does not support C++\nbut it is needed by the SDL system."
3438	"The specified target directory\n>%1<\nwas not found.\n\nCreate?"
3439	"This command is allowed only if a .sdt file is opened!"
3440	"Unallowed combination with \"%1\" in line %2 of <%3>."
3441	"Unallowed keyword found in line %1 of <%2>"
3442	"Undefined macro found in line %1 of file <%2>.\n\"%3\"\nThis macro will be discarded!"
3443	"Undefined macro/keyword found in line %1\nof file <%2>.\n\"%3\"\n"
3444	"Unknown integration \"%1\" found in line %2 of >%3<."
3445	"Unknown integration type %1 found in (line %2 of file <%3>)"
3446	"Unknown keyword '%1' in line %2 of <%3>"
3447	"Unknown state in parameter reader"
3448	"Unspecified error in line %1 of <%2>"
3449	"Unspecified error in makefile generation."
3450	"Wrong \"%1\" definition in line %2\nof file <%3>"
3451	"Wrong keyword in line %1\nof file <%2>."
3452	"Wrong number of arguments!\nThe given command\n<%1>\nshould look like\n%2 %3"
3453	"You have to load the very first PR file using 'Open-PR' command."
3454	"You have to open an .sdt, .pr or .pdm file first!"
3455	"You have to select an application, node or component first!"
3456	"You have to select an integration first!"
3457	"\n**ERROR: "
3458	"Cannot calculate sdtdir\nExecutable is placed in <%1>."
3459	"Cannot delete directory\n%1\nThe directory is not empty!"
3460	"Cannot open makefile <%1> in <%2> for writing."
3461	"Cannot save the file <%1>"
3462	"Cannot start external editor\n<%1>"
3463	"%e not found in linker options."
3464	"<%1> is not a PR file"
3465	"%o not found in compiler or additional compiler options."
3466	"%s not found in compiler or additional compiler options."
3467	"- the <Routing header file> must have the extension '.h'!\n"
3468	"- the <Routing source file> must have the extension '.c'!\n"
3469	"Use definite length in BER"
3470	"Remove error checking."
3471	"Use PER as default"
3472	"Do not use automatic scaling"
3473	"Use aligned PER"
3474	"Use unaligned PER without end padding"
3475	"Use unaligned PER"
3476	"ASCII coding"
3477	"BER coding"
3478	"PER coding"
3479	"Preemption prio levels"
3480	"Parameter %1"
3481	"Alternative signal sending"
3482	"Show errors on standard out"
3483	"Text trace"
3484	"Include SDL name information"
3485	"MSC trace"
3486	"SDL trace"
3487	"Units"
3488	"Scale"
3489	"Use automatic target data coding"
3490	"Gate Name"
3491	"Report errors in choice variables"
3492	"Report coder error messages"
3493	"Detect more instance creations than defined"
3494	"Errorchecks in predefined ADT operators"
3495	"Report missing path in decision"
3496	"Report kis-usage of the error term"
3497	"Report errors in import actions"
3498	"Report conversion errors"
3499	"Report index errors"
3500	"Report integer/octet division errors"
3501	"Environment header file"
3502	"Global node number"
3503	"Report errors in accessing data "
3504	"Report warnings in OUTPUT"
3505	"Report illegal use of pointers"
3506	"Report range errors for variables"
3507	"Report real division errors"
3508	"Report dereference of NULL pointer "
3509	"Report errors in accessing unions"
3510	"Report errors in view actions"
3511	"Include free functions for signal discard"
3512	"Full support of SDL charstrings"
3513	"Include configuration file"
3514	"Include signal number file"
3515	"Include file"
3516	"Support light integrations"
3517	"Add commands to handle breakpoints"
3518	"Add command '%1'"
3519	"Add command '%1'"
3520	"Add command '%1'"
3521	"Add possibility to send strings from target"
3522	"Add command '%1'"
3523	"Add command '%1'"
3524	"Add command '%1'"
3525	"Add command '%1'"
3526	"Add command '%1'"
3527	"Add commands to control signals"
3528	"Add commands to handle single stepping"
3529	"Add command for system control"
3530	"Add commands to control timers"
3531	"Allow Target Tester commands"
3532	"Add connection to external enviroment"
3533	"Add the Cmicro Recorder"
3534	"Use the Target Tester"
3535	"Add basic tracer functionality"
3536	"Print additional information"
3537	"Add command '%1'"
3538	"Add Cmicro Recorder realtime"
3539	"Allow SDL symbol trace"
3540	"Allow signal filter"
3541	"Standard IO library"
3542	"Trace DECISION symbols"
3543	"Trace DISCARD of signals"
3544	"Trace IMPLICIT CONSUMPTION of signals"
3545	"Trace procedure CALLS"
3546	"Trace SAVE of signals"
3547	"Trace NEXTSTATE symbols"
3548	"Trace all system errors"
3549	"Trace process priorities"
3550	"Trace TASK symbols"
3551	"CPU word size"
3552	"Create priority"
3553	"End up in an endless loop"
3554	"Use standard I/O"
3555	"Use a user defined function  "
3556	"Maximum amount of breakpoints"
3557	"Malloc size"
3558	"String length"
3559	"Amount of receiver buffers"
3560	"Length of one receiver buffer"
3561	"Length of buffers"
3562	"Amount of transmitter buffers"
3563	"Length of one transmitter buffer"
3564	"Size of signal queue"
3565	"Use user defined amount of timers"
3566	"User defined amount of timers"
3567	"Minimum block size"
3568	"Size of signal parameters"
3569	"Include functions to handle more system info"
3570	"Timer priority"
3571	"Maximum execution time"
3572	"Add user defined signal parameter free functions"
3573	"Send automatic coding message"
3574	"Transition execution time"
3575	"Use communications link"
3576	"Allow debugging functions"
3577	"Use generated amount of timers"
3578	"Use large transition tables"
3579	"Add functions for queue handling"
3580	"Rapid process variable initialization"
3581	"Use Watch Dog"
3582	"All error checks wanted"
3583	"Use minimum block size"
3584	"Basic error checks wanted"
3585	"Use monitor functions"
3586	"Allow more than 250 signals"
3587	"Allow more than 256 instances"
3588	"No automatic scaling from sdl_cfg.h"
3589	"No error checks wanted"
3590	"Allow large signal parameters"
3591	"Use preemption"
3592	"Receiver Process Id"
3593	"Use of SENDER in start transition"
3594	"Memory management"
3595	"System Stop"
3596	"Sender Process Ids"
3597	"Add send function for environment signals"
3598	"Use signal priorities"
3599	"Use time stamps in signals"
3600	"Combined static and dynamic queue"
3601	"Static signal queue only"
3602	"Timer scale"
3603	"Timer scale factor"
3604	"Close environment (xCloseEnv)"
3605	"Signals from environment (xInEnv)"
3606	"Initialize environment (xInitEnv)"
3607	"Signals to environment (xOutEnv)"
3608	"Simple signal output"
3609	"Wait on Target Tester startup"
3610	"End up in an endless loop"
3611	"Use standard I/O"
3612	"Use a user defined function"
3613	"MSC trace in editor (Win32 and Solaris only)"
3614	"MSC trace"
3615	"Do not include xCloseEnv()"
3616	"Do not include the hooks file"
3617	"Do not include xInitEnv()"
3618	"Do not allow ASN.1 data types"
3619	"Do not support Charstrings "
3620	"Do not allow ASN.1 data type objectidentifier"
3621	"Do not allow ASN.1 data type octetbitstring"
3622	"Do not allow the use of SDL real values"
3623	"Do not use automatic operator scaling"
3624	"Do not include predefined generators"
3625	"Text trace"
3626	"Enable process priorities"
3627	"Enable process and signal priorities (prs prio is stronger)"
3628	"Restricted support of SDL charstrings"
3629	"Routing header file"
3630	"Server port number"
3631	"Enable signal priorities"
3632	"Enable signal and process priorities (sig prio is stronger)"
3633	"Report range errors for syntypes"
3634	"Handle time in seconds"
3635	"Include free functions for timer discard"
3636	"Allow internal signal queue handling"
3637	"Protected creation of process instances"
3638	"Handle time as an unsigned value"
3639	"Include environment header file"
3640	"Include routing header file"
3641	"Boolean as unsigned char"
3642	"Integer as long values"
3643	"One task per instance set"
3644	"Map real values to float"
3645	"Preemption default prio level"
3646	"Default signal priority"
3647	"Character alignment"
3648	"Double alignment"
3649	"Float alignment"
3650	"Integer alignment"
3651	"Long integer alignment"
3652	"Pointer alignment"
3653	"Short integer alignment"
3654	"String Parameter"
3655	"The BER coder functions will use a definite length"
3656	"All the error check routines will be removed from the coder library."
3657	"The PER encoding rules will be used as default instead of BER"
3658	"The automatic configuration about the use of coding procedures will not be used."
3659	"The aligned PER coder functions are used instead of the unaligned ones"
3660	"The unaligned PER coder functions without end padding are used"
3661	"The aligned PER coder functions are used instead of the aligned ones"
3662	"Build coder library without support for ASCII coding"
3663	"Build coder library without support for BER coding"
3664	"Build coder library without support for PER coding"
3665	"Character endian"
3666	"Double endian"
3667	"Float endian"
3668	"Integer endian"
3669	"Long integer endian"
3670	"Pointer endian"
3671	"Short integer endian"
3672	"Integer Parameter"
3673	"Length of characters counted in octets "
3674	"Length of double values counted in octets"
3675	"Length of float values counted in octets"
3676	"Length of integer values counted in octets"
3677	"Length of long values counted in octets"
3678	"Length of pointers counted in octets"
3679	"Length of short values counted in octets"
3680	"Amount of process priority levels"
3681	"Signals between different threads will be send using the OS's message queue."
3682	"Error messages will be printed on stdout, suppressed otherwise"
3683	"An text trace will be printed on stdout"
3684	"SDL name information is added to the tSDLSignalInfo nodes"
3685	"An MSC trace will be generated"
3686	"An SDL text trace will be printed to stdout"
3687	"Name of timer units"
3688	"Scale factor of timer units"
3689	"If set to 'yes' the data coding struct sent by the target will be used."
3690	"The gate's name and path"
3691	"Detect and report attempts to acces non-active components in choice variables."
3692	"Turns on/off the output of error messages from the coder library."
3693	"Detect and report if more static instances created at start-up than the maximum number of concurrent instances."
3694	"Check predefined SDL operators during runtime"
3695	"Detect and report when there is no possible path out from a decision"
3696	"Detect and report the usage of the error term in an SDL expression"
3697	"Detect and report errors in import actions"
3698	"Check conversion from real to integer "
3699	"Check the index everytime an array is accessed"
3700	"Check all divisions of integer/octet values"
3701	"Name of the user's environment header file"
3702	"Node number to be used with this component"
3703	"Detect and report attempts to access optional struct components that are not present"
3704	"Detect and report warnings in outputs (mainly outputs where signal is immediately discarded)"
3705	"Detect and report illegal use of Own and ORef pointers"
3706	"Check for range of syntypes"
3707	"Check all divisions of real values"
3708	"Detect and report attempts to dereference NULL pointer"
3709	"Detect and report attempts to access non-active components in a #UNION"
3710	"Detect and report errors in view actions"
3711	"The functions to free signal parameters in case\nof a signal discard will be included"
3712	"Use of SDL charstrings is allowed"
3713	"The generated configuration file will be included"
3714	"The signal number file generated by the SDL to C compiler will be included"
3715	"The file given here will automatically be included in ml_typ.h"
3716	"The kernel will be configured in a way so that light integrations are possible"
3717	"The source to handle breakpoint commands\nis added to the target executable\n(%1)"
3718	"The source to handle '%1' command\nis added to the target executable"
3719	"The source to handle '%1' command\nis added to the target executable"
3720	"The source to handle '%1' command\nis added to the target executable"
3721	"The source to send strings from target\nis added to the target executable"
3722	"The source to handle '%1' command\nis added to the target executable"
3723	"The source to handle '%1' command\nis added to the target executable"
3724	"The source to handle '%1' command\nis added to the target executable"
3725	"The source to handle '%1' command\nis added to the target executable"
3726	"The source to handle '%1' command\nis added to the target executable"
3727	"The source for signal commands is added to the target executable\n(%1)"
3728	"The source to handle single stepping is added to the target executable\n(%1)"
3729	"The source to handle system control commands\nis added to the target executable\n(%1)"
3730	"The source for timer commands is added to the target executable.\n(%1)"
3731	"Add host command handling to the target executable"
3732	"Allow signal exchange with an external environment"
3733	"Add the Cmicro Recorder to the target executable"
3734	"Use the Target Tester in target"
3735	"The basic functionallity to allow trace is added to the target executable.\nIncluding trace of INPUT, OUTPUT, SET, RESET and CREATE."
3736	"Add Cmicro Kernel function trace"
3737	"The source to handle '%1' command\nis added to the target executable"
3738	"Add realtime play to the target executable"
3739	"Allows SDL symbol trace in the SDL Editor"
3740	"Allows signal filtering for Target Tester trace"
3741	"Include standard library"
3742	"The function to trace decision symbols is added to the target executable"
3743	"The function to trace discard of signals\nis added to the target executable"
3744	"The function to trace implicit consupmtion of signals\nis added to the target executable"
3745	"The function to trace procedure calls is added to the target executable"
3746	"The function to trace when signals are saved\nis added to the target executable"
3747	"The function to trace nextstate symbols is added to the target executable"
3748	"The function to trace all system errors is added to the target executable"
3749	"The function to trace the priorities of processes\nis added to the target executable"
3750	"The function to trace task symbols is added to the target executable"
3751	"Define the CPU's word size (8 is OK for all platforms)"
3752	"Priority for create signals"
3753	"Stop the execution in an endless loop"
3754	"Call xmk_printf() (module mk_cpu.c) in the ErrorHandler() in case of errors"
3755	"Call a user defined function in the ErrorHandler()"
3756	"The array to handle set breakpoints is dimensioned here"
3757	"Maximum size for memory allocation "
3758	"Maximum length of user strings"
3759	"Amount of entries in the receiver buffer"
3760	"Size of one entry in the receiver buffer"
3761	"Buffersize for SDL charstrings if buffer method is used"
3762	"Amount of entries in the transmitter buffer"
3763	"Size of one entry in the transmitter buffer"
3764	"Size of the static signal queue"
3765	"The static timer queue will be sized due to the given value"
3766	"The user defined size of the static timer queue"
3767	"Define the minimum size of memory blocks"
3768	"Parameters included within the signal's header"
3769	"Add the functions functions xmk_GetProcessState(),\nxmk_SetProcessState(), xmk_GetProcessInstanceData(), xmk_QueryQueue(),\nxmk_FirstTimer(), xmk_NextTimer(), xmk_GetOccupiedMem(),\n xmk_GetFreeMem() and xmk_CleanPool()"
3770	"Timer priority value"
3771	"Comparative value for execution time"
3772	"Signal parameters dynamically allocated will be freed in a user defined function\n(in case of discard, implicit consumption, asterix input)"
3773	"The Target Tester will use this message for coding purposes."
3774	"Check the execution time of SDL transitions"
3775	"Allow trace via communications link"
3776	"Add basics to debug the target executable"
3777	"The static timer queue will be sized due to the\ncalculated amount of timers"
3778	"Allow more than 252 transitions per process."
3779	"The functions xmk_QueueEmpty(), xmk_SaveSignalsOnly() and xmk_NextTimerExpiry() are added to the application"
3780	"Initialize all SDL variables except procedure variables using memset"
3781	"Use target's watchdog"
3782	"Put all error checks into the target executable"
3783	"Use the minimum block size as minimum size of allocated memory"
3784	"Use only a basic set of error checks"
3785	"Monitor functions will be added to the target executable\n(see ml_mon)"
3786	"Extend the kernel in a way so that up to 32760 signals can be used."
3787	"The upper limit for instances per process type is set to 65535"
3788	"Disable the Cmicro Kernel autoscaling"
3789	"Remove all error checks from executable"
3790	"Allow signal parameters larger than 250 octets"
3791	"Use the preemptive Cmicro Kernel"
3792	"Use the receiver ID in signals"
3793	"Allow the use of SENDER and OFFSPRING in the start transition"
3794	"Use the memory functions of the Cmicro Kernel"
3795	"Include functionality to handle the SDL system stop"
3796	"Use the sender process ID in each signal"
3797	"The function xmk_EnvSend() will be added to the application"
3798	"Enable signal priorities"
3799	"Use timestamps in signals"
3800	"Create signals in the static and the dynamic memory"
3801	"Set up a signal queue of static size only"
3802	"Allow the scale of timerunits"
3803	"Scale the timerunits"
3804	"Use Cmicro Library's memcpy"
3805	"Use Cmicro Library's memset"
3806	"Use addition to the Cmicro Library's malloc"
3807	"Use the C function strcmp defined within Cmicro Library"
3808	"Use the C function strcpy defined within Cmicro Library"
3809	"Use the C function strlen defined within Cmicro Library"
3810	"Use the C function strncpy defined within Cmicro Library"
3811	"Close the environment when the SDL system stops"
3812	"Enable polling of the environment (look for incoming signals)"
3813	"Initialize the environment when starting the SDL system"
3814	"Allow signals to the environment"
3815	"Use the simple way to send signals (SDL output)"
3816	"Enables trace scaling during runtime"
3817	"Stop the execution in an endless loop"
3818	"Call xmk_printf() (module mk_cpu.c) in the ErrorHandler() in case of warnings"
3819	"Call a user defined function in the ErrorHandler()"
3820	"An MSC trace will be shown in MSC Editor"
3821	"An MSC trace will be printed on stdout"
3822	"The de-initialization function xCloseEnv() will not be compiled and used in the target"
3823	"The file scthooks.h will not be included all the macro definitions will be expanded empty"
3824	"The initialization function xInitEnv() will not be compiled and used in the target"
3825	"Sorts according to the ASN.1 syntax are not allowed"
3826	"Use of SDL charstrings is not allowed"
3827	"ASN.1 sort objectidentifier cannot be used"
3828	"ASN.1 sort octetbitstring cannot be used"
3829	"Disable the use of real values in SDL "
3830	"The automatic configuration about the use of operators will not be used."
3831	"Prevent the use of long macro definitions"
3832	"A text trace will be printed on stdout"
3833	"Use priorities on process instance sets"
3834	"Use first priorities on process instance sets and then priorities on signal instances"
3835	"Use of SDL charstrings is allowed"
3836	"Name of the routing header file"
3837	"The TCP/IP server's port number"
3838	"Use priorities on signal instances"
3839	"Use first priorities on signal instances and then priorities on process instance sets"
3840	"Check SDL syntypes during runtime"
3841	"The time value is implemented on a second base"
3842	"The functions to free timer parameters in case\nof a timer discard will be included"
3843	"Process instances ruinning in one OS task can use an internal signal queue instead of the OS message queue"
3844	"The critical path used to create process instances is protected from multiple access"
3845	"The time value is handled as an unsigned type (unsigned long int)"
3846	"Include the user's environment header file in environment C file"
3847	"Include the routing header file in environment C file"
3848	"Size of boolean values in the target"
3849	"Select size of SDL integer and SDL natural"
3850	"Put all the instances of one process type into one OS task"
3851	"Select size of SDL real values"
3852	"Default process priorities"
3853	"Default signal priority"
3854	"You should remove the files\n- $(sdtdir)/cmicro/tester/mt_rec.c\n- $(sdtdir)/cmicro/tester/mt_play.c\nin dialog Compiler/Linker/Make > Source Files\nBoth files are no longer needed"
3855	"\"Automatic target data coding\" has to be switched off in the host configuration"
3856	"You should remove $(sdtdir)/cmicro/kernel/ml_mon.c\nin dialog Compiler/Linker/Make > Source Files\nThis file is no longer needed"
3857	"You have to fill up the function\nxRouteSignal() in module\nmk_user.c on your own!)"
3858	"You should remove $(sdtdir)/cmicro/kernel/ml_mem.c\nin dialog Compiler/Linker/Make > Source Files\nThis file is no longer needed"
3859	"You must add the files\n- $(sdtdir)/cmicro/tester/mt_rec.c\n- $(sdtdir)/cmicro/tester/mt_play.c\nin dialog Compiler/Linker/Make > Source Files !"
3860	"If filtering signals from the target trace,\nMSC trace will probably not work correctly!"
3861	"You have to check if the function\nxmk_printf() in module mk_cpu.c\nis designed to your platforms neededs"
3862	"\"Automatic target data coding\" has to be switched on in the host configuration"
3863	"You must add the file $(sdtdir)/cmicro/kernel/ml_mon.c\nin dialog Compiler/Linker/Make > Source Files !"
3864	"You must add the file $(sdtdir)/cmicro/kernel/ml_mem.c\nin dialog Compiler/Linker/Make > Source Files !"
3865	"You have to check if the function\nxmk_printf() in module mk_cpu.c\nis designed to your platforms needs"
3866	"Coder automatic scaling"
3867	"ASN.1 sorts"
3868	"Automatic coding"
3869	"Automatic scaling"
3870	"Character strings"
3871	"Coder"
3872	"Commands"
3873	"Environment functions"
3874	"Error checks"
3875	"Error handler"
3876	"Execution time check"
3877	"Gate integer parameter"
3878	"Gate selection"
3879	"Gate string parameter"
3880	"General"
3881	"Initialization"
3882	"Kernel limits"
3883	"Light integration"
3884	"PER"
3885	"Predefined sorts"
3886	"Preemption"
3887	"Reaction on errors"
3888	"Reaction on warnings"
3889	"Recorder"
3890	"Remove support for ..."
3891	"Scheduling"
3892	"Signal handling"
3893	"Signal priorities"
3894	"Signal queue"
3895	"Signal structure"
3896	"Size of variables"
3897	"String functions"
3898	"TCP/IP signal sending"
3899	"Target data coding: alignment"
3900	"Target data coding: endian"
3901	"Target data coding: length"
3902	"Target timer"
3903	"Threaded integration"
3904	"?"
3905	"Tight integration"
3906	"Time implementation"
3907	"Timer queue"
3908	"Timer scaling"
3909	"Trace buffers"
3910	"Tracer"
3911	"Use of memory"
3912	"Hint"
3913	"%1 file <%2> opened."
3914	"Add a tester source file to compile"
3915	"All compiler, linker and make configurations saved."
3916	"\"BEGIN\", \"END\" and \"FILEEND\" are protected keywords.\n\nPlease choose an other word."
3917	"Default value is: '%1'\n"
3918	"Do you want all the flags to be set up as needed?"
3919	"Due to compiler change:"
3920	"\nDue to modifications in the settings:"
3921	"File >%1< has been modified.\nSave file before closing?\n"
3922	"\nGenerating default <%1>."
3923	"Generating %1 ... OK\n"
3924	"\nGenerating default <%1>."
3925	"Log-File <%1> opened %2"
3926	"\n%1\nMaking <%2>\n%3\n"
3927	"NOTE: The generated environment file <%1> is added to the list of kernel and library files to compile!"
3928	"New Analyzer options read in."
3929	"No further Analyzer error found!"
3930	"\nObject directory <%1> created."
3931	"\nOpened batch file <%1>."
3932	"Please select a control you want help about!"
3933	"Please select an SDL to C compiler first!"
3934	"Please select a pre-defined integration first"
3935	"Please specify a compiler first!"
3936	"Reading env.c ... OK"
3937	"Reading %1 ... not found"
3938	"Read value is: '%1'\n"
3939	"Removing object files in <%1> ..."
3940	"Renamed %1 to %2\n"
3941	"%1 SDL Target Tester object file(s) removed"
3942	"\nSelected application is \"%1\"."
3943	"Selected compiler is <%1>."
3944	"\nSelected component is \"%1\"."
3945	"\nSelected node is \"%1\"."
3946	"Signal '%1' is removed from %2! (no longer found in SDL system)"
3947	"\nStarting SDL Simulator ..."
3948	"\nStarting SDL Target Tester ..."
3949	"\nStarting SDL Validator ..."
3950	"Target executable in <%1> removed"
3951	"The configurations have been modified.\n Save all configurations?"
3952	"The current SDL system uses less than\n250 signals and timers in sum.\n\nThe flag %1\nshould not be set.\n\nCHANGE?\n"
3953	"The current SDL system uses more than\n250 signals and timers in sum.\n\nThe flag %1\nshould be set.\n\nCHANGE?\n"
3954	"There were lines in UNIX style detected in file\n<%1>\nWhen saving this file will be stored in DOS style!\n"
3955	"The signal '%1' has to be handled in %2. (This message is only given the very first generation of env.c)"
3956	"This flag, \"%1\" (%2), has dependencies!"
3957	"\n- USER BREAK\n- Analyze/Code generation interrupted\n"
3958	"\n- USER BREAK\n- Compile and link interrupted\n"
3959	"\n- USER BREAK\n- Download interrupted\n"
3960	"\n- USER BREAK\n- Makefile generation interrupted\n"
3961	"\n- USER BREAK\n- Test application interrupted\n"
3962	"Using personal parameters (sdttaex.par)"
3963	"You are updating to a newer version\nplease read the release notes!"
3964	"You have to save the system file before modifications\nin analyzer options take effect!"
3965	"%1 \"additional\" object file(s) removed"
3966	"and the ones below must be set:"
3967	"depends on the following flags set:"
3968	"\n<%1> has changed!"
3969	"%1 kernel/library object file(s) removed"
3970	"%1 other object file(s) removed"
3971	"the flags below must be reset:"
3972	"these flags will automatically be set:"
3973	"The following options are unknown and have been\nremoved from the command line: %1"
3974	"&About"
3975	"Add C&ommunications Link..."
3976	"Add &Compiler..."
3977	"Add new compiler description"
3978	" &Analyze"
3979	" A&ssistant"
3980	"Bare Integrations"
3981	" &Clean"
3982	"&Close"
3983	"&Customize..."
3984	"&DOS 2 UNIX..."
3985	"Delete"
3986	"&Edit"
3987	"Edit Compiler &Section..."
3988	"Edit &Environment File"
3989	"Edit &Makefile"
3990	"Edit Configuration &Header File"
3991	"E&xit\tCtrl+Q"
3992	" FAQs"
3993	"&File"
3994	"Full Make"
3995	" &Generate code"
3996	"&Help"
3997	"&Indent..."
3998	"Info"
3999	"Light Integrations"
4000	" Load &SDL System"
4001	"&Make"
4002	" &Make all"
4003	" On &Targeting Expert\tCtrl+H"
4004	" On &UI"
4005	" &Open"
4006	" &Open\tCtrl+O"
4007	"&Preprocessor..."
4008	" &Print"
4009	"P&rinter setup"
4010	"Remove Co&mmunications Link..."
4011	"&Remove Compiler..."
4012	"S&DL"
4013	"SDL &Simulator UI\tCtrl+J"
4014	"SDL &Target Tester"
4015	"SDL &Validator UI\tCtrl+G"
4016	" &Save"
4017	" &Save\tCtrl+S"
4018	"Save &as ..."
4019	" Show &Organizer\tCtrl+1"
4020	"&Show Welcome Window"
4021	"Simulations"
4022	"TCP/IP communication"
4023	"Target Tests"
4024	"Threaded Integrations"
4025	"?"
4026	"Tight Integrations"
4027	"&Tools"
4028	"&UNIX 2 DOS..."
4029	"&Undo\tCtrl+Z"
4030	"User defined Integrations"
4031	"&Utilities"
4032	"Validations"
4033	"&Wizards"
4034	"%1: %2"
4035	"- Analyze/Code generation completed\n"
4036	"\n+ Analyze/Code generation started\n"
4037	"- Compile and link completed\n"
4038	"- Compile and link failed\n"
4039	"\n+ Compile and link started\n"
4040	"- Download completed\n"
4041	"\n+ Download started\n"
4042	"Do you really want to delete this integration?\n\nFile <%1> and directory <%2>\nwill be removed from\n<%3>!"
4043	"- Environment generation completed\n"
4044	"- Environment generation failed\n"
4045	"- Environment generation interrupted\n"
4046	"\n+ Environment generation started\n"
4047	"Executing >%1<\n"
4048	"Executing >taexutil %1<\n"
4049	"- File generation for converter tool completed\n"
4050	"- File generation for converter tool failed\n"
4051	"\n+ File generation for converter tool started\n"
4052	"File name already exists!\nPlease select another file name!"
4053	"Generate the SDL system to get automatic configuration?"
4054	"Integration <%1> is selected.\n"
4055	"- Makefile generation completed\n"
4056	"- Makefile generation failed\n"
4057	"- Makefile generation interrupted\n"
4058	"\n+ Makefile generation started\n"
4059	"SDL to C compiler <%1> is selected.\n"
4060	"- Test completed\n"
4061	"- Test started\n"
4062	"The SDL Target Tester is currently switched off!\nShould it become switched on?"
4063	"There is a deep nested target directory structure found.\nThis is no longer needed. Should it be flattened?"
4064	"Welcome to SDL Targeting Expert %1\n"
4065	"Note: The SDL system uses C++ constructs, a C++ compiler is needed"
4066	"Display version and copyright information"
4067	"Add a new communications link"
4068	"Add a new compiler to the list of known compilers"
4069	"Advanced Mode"
4070	"All compiler, linker and make configurations saved."
4071	"Analyze the selected component"
4072	"Analyzing \"%1\""
4073	"Switch the Targeting Assistant on/off"
4074	"Building user data"
4075	"Remove all object files and the target application"
4076	"Specify a compiler section"
4077	"Compiling \"%1\""
4078	"Customize the editor and the advanced mode"
4079	"Downloading application of \"%1\""
4080	"Open an editor to modify the environment file"
4081	"Open an editor to modify the configuration header file"
4082	"Open an editor to modify the generated makefile"
4083	"Executing test application for \"%1\""
4084	"Exit this application"
4085	"Export settings"
4086	"Generate code for the selected component"
4087	"Generating makefile for \"%1\""
4088	"Indent source files"
4089	"Initializing"
4090	"Load the corresponding SDL system into the Organizer"
4091	"Loading external parameters"
4092	"Loading pre-defined integration settings"
4093	"Loading user settings"
4094	"Make all the configured components"
4095	"Show help on the Targeting Expert"
4096	"Show help on the Targeting Expert's UI"
4097	"Open a partitioning diagram file"
4098	"Open partitioning diagram"
4099	"Perform a DOS to UNIX conversion of ASCII text files"
4100	"Perform a UNIX to DOS conversion of ASCII text files"
4101	"Preprocess generated C file"
4102	"Reading PR file"
4103	"                     Reading Partitioning Diagram"
4104	"Reading system file"
4105	"Remove a communications link"
4106	"Remove a compiler from the list of known compilers"
4107	"Save all compiler, linker and make configurations"
4108	"Set a new filename for settings"
4109	"Setup a TCP/IP communication"
4110	"Show the Organizer"
4111	"Show frequently asked question"
4112	"Show the welcome window once more"
4113	"Specify a compiler section"
4114	"Start an SDL Simulator UI"
4115	"Start an SDL Target Tester"
4116	"Start an SDL Validator UI"
4117	"Interrupt the current make process"
4118	"Updating internal data structure"
4119	"Updating target sub-directories"
4120	"Utility working"
4121	"Additional Compiler"
4122	"Coder"
4123	"Communications Link"
4124	"Compiler"
4125	"Compiler Flag"
4126	"Env. header file"
4127	"Environment"
4128	"Execution"
4129	"Host"
4130	"Kernel"
4131	"Library Manager"
4132	"Linker"
4133	"Make"
4134	"Source Files"
4135	"Support of SDL"
4136	"Tester"
4137	"All files will be generated anew, even if the contents do not have changed"
4138	"Analyze"
4139	"Analyze and generate code"
4140	"Analyze and generate code during make"
4141	"An user defined action that will be performed as first action"
4142	"Assistant"
4143	"Clear the list of files"
4144	"Clear the log window"
4145	"Close the editor window"
4146	"Compiler"
4147	" &Copy\tCtrl+C"
4148	"Copy the selected text"
4149	" Cu&t\tCtrl+X"
4150	"Cut the selected text"
4151	"Do no use any test application"
4152	"Downloader"
4153	"&Edit"
4154	"Enter the warning or error message to filter from Analyzer output"
4155	"Export as pre-defined integration settings"
4156	"Generate ASN.1 coder functions"
4157	"Generate SDL coder functions"
4158	"Generate all SDL identifiers with lower case letters"
4159	"Generate an environment header file"
4160	"Generate an instance information file"
4161	"Generate a signal number file"
4162	"Generate environment functions"
4163	"Give a tool for source treatment before compilation"
4164	"Give a tool for the treatment after linkage"
4165	"Give the C parser options here"
4166	"Give the assembler options here"
4167	"Give the compiler options here"
4168	"Give the compiler's option to define macros and the library flag here"
4169	"Give the executable extension"
4170	"Give the full command line of the download application here"
4171	"Give the full command line of the test application here"
4172	"Give the include option plus include paths"
4173	"Give the include option plus include paths for the coder files"
4174	"Give the input extension"
4175	"Give the library extension"
4176	"Give the library manager options here"
4177	"Give the linker options here"
4178	"Give the name of the C parser application (macro assembler)"
4179	"Give the name of the assembler application"
4180	"Give the name of the compiler application"
4181	"Give the name of the external makefile generator"
4182	"Give the name of the library manager application"
4183	"Give the name of the linker application"
4184	"Give the name of the object directory (relative path to the target directory)"
4185	"Give the name of the used makefile"
4186	"Give the object extension"
4187	"Help"
4188	"Include TCP/IP interface for sending signals"
4189	"Insert/remove the compiler option to compile C files as C++ files"
4190	"Insert/remove the compiler option to compile with debug info"
4191	"Insert the complete pre-processor command"
4192	"Insert the rule to generate %1 here"
4193	"Interrupt the current make process"
4194	"Leave the dialog without saving"
4195	"Leave this dialogs without saving"
4196	"Load SDL system"
4197	"Low Event Log size"
4198	"Make all"
4199	"Make the target executable"
4200	"Modify the selected entry"
4201	"Open (Ctrl+O)"
4202	"Open a browser and add a file"
4203	"Open a browser and select an application"
4204	"Open an existing file"
4205	"Show Organizer (Ctrl+1)"
4206	" &Paste\tCtrl+V"
4207	"Paste the text from the clipboard"
4208	"Pop up the Organizer's Analyzer-Options-Dialog"
4209	"Print"
4210	"Printer setup"
4211	"Print the current file"
4212	"Re-generate the complete source code and make the target executable"
4213	"Remove the selected entry"
4214	"SDL to C compiler"
4215	"Save (Ctrl+S)"
4216	"Save the configuration to the manual configuration file"
4217	"Save the current file as ..."
4218	"Save the log's contents"
4219	"&Select all"
4220	"Select a file name and save all the used Analyzer commands to a file"
4221	"Selected filename for user settings"
4222	"Select pre-defined integration settings"
4223	"Select the component to do targeting for"
4224	"Select the contents of the window"
4225	"Select the make tool"
4226	"Select the section %1 to be generated or not"
4227	"Select the user settings' filename"
4228	"Select this if the download application shall be used"
4229	"Set default value"
4230	"Show Analyzer error"
4231	"Show help to these dialogs"
4232	"Show help to the selected flag"
4233	"Show help to the selected pre-defined integration settings"
4234	"Show help to this dialogs"
4235	"Shows the list of all additional source files"
4236	"Shows the list of all used SDL Target Tester source files"
4237	"Shows the list of all used kernel source files"
4238	"Shows the list of libraries to be linked, too"
4239	"Shows the list of object files to be linked, too"
4240	"Show the main window"
4241	"Specify a command line for a test application"
4242	"Specify how the converter tool file should be generated"
4243	"Specify how the generated C files will become separated"
4244	"Specify the path to the SDL to C compilers's library\n(if empty the installation directory will be used)"
4245	"Stop Make (Break)"
4246	"Switch generation of a makefile on or off"
4247	"Targeting Expert"
4248	"The converter tool file will get this file name"
4249	"The names of the generated files will get this prefix"
4250	"The make dependancies should be given here"
4251	"Undo the done modifications"
4252	"Undo the previous editor action"
4253	"Use application settings"
4254	"Use parent node settings"
4255	"User defined Event Log size"
4256	"Use the SDL Simulator to test"
4257	"Use the SDL Target Tester to test"
4258	"Use the SDL Validator to test"
4259	"Generate full variable prefixes"
4260	"Save all the compiler/linker/make settings"
4261	"Save the current file"
4262	"Target executable"
4263	"Test application"
4264	"Warning"
4265	"Cannot copy file <%1> because environment variable '%2' is unknown"
4266	"Detail '%1' found in line %2\nof <%3>\n(value %4).\nNot yet supported"
4267	"Do not know what to do with flag >%1<."
4268	"Flag >%1< is no longer known in this Tau release."
4269	"Flag >%1< is not set. It must be set as >%2< in this Tau release (done)."
4270	"Flag >%1< is renamed and inverted >%2<."
4271	"Flag >%1< is renamed to >%2< (which is automatically set)."
4272	"No action defined for unknown flag >%1<."
4273	"Since there are some major changes in the environment generation, it is recomended to store a copy of your \"env.c.bak\""
4274	"There are Control Units detected in the system file\nThey will be ignored"
4275	"There are procedures used in the SDL system and the %1 flag is set.\nProcedure variables are not initialized!"
4276	"\n**Warning: "
4277	"%1 is not yet supported.\nSee line %2 of <%3>"
4278	"<%1> not found (using defaults)."
4279	"SDL to C compiler"